An online submission and tracking service via Internet facilitates a speedy and cost-effective submission of manuscripts. Manuscripts and the full thematic issues must be submitted online via Bentham's Manuscript Processing System (MPS) at https://bentham.manuscriptpoint.com/journals/chddt / View Submission Instructions
Manuscripts must be submitted by one of the authors of the manuscript, and should not be submitted by anyone on their behalf. The principal/corresponding author will be required to submit a Copyright Letter along with the manuscript, on behalf of all the co-authors (if any). The author(s) will confirm that the manuscript (or any part of it) has not been published previously or is not under consideration for publication elsewhere. Furthermore, any illustration, structure or table that has been published elsewhere must be reported, and copyright permission for reproduction must be obtained.
For all online submissions, please provide soft copies of all the materials (main text in MS Word or Tex/LaTeX), figures / illustrations in TIFF, PDF or JPEG, and chemical structures drawn in ChemDraw (CDX) / ISISDraw (TGF) as separate files, while a PDF version of the entire manuscript must also be included, embedded with all the figures / illustrations / tables / chemical structures etc.
It is imperative that before submission, authors should carefully proofread the files for special characters, mathematical symbols, Greek letters, equations, tables, references and images, to ensure that they appear in proper format.
References, figures, tables, chemical structures etc. should be referred to in the text at the appropriate place where they have been first discussed. Figure legends/captions should also be provided.
A successful electronic submission of a manuscript will be followed by a system-generated acknowledgement to the principal/corresponding author. Any queries therein should be addressed to email@example.com
Authors who publish in Bentham Science print & online journals will transfer copyright to their work to Bentham Science Publishers. Submission of a manuscript to the respective journals implies that all authors have read and agreed to the content of the Copyright Letter or the Terms and Conditions. It is a condition of publication that manuscripts submitted to this journal have not been published and will not be simultaneously submitted or published elsewhere. Plagiarism is strictly forbidden, and by submitting the article for publication the authors agree that the publishers have the legal right to take appropriate action against the authors, if plagiarism or fabricated information is discovered. By submitting a manuscript the authors agree that the copyright of their article is transferred to the publishers if and when the article is accepted for publication. Once submitted to the journal, the author will not withdraw their manuscript at any stage prior to publication.
It is mandatory that a signed copyright letter also be submitted along with the manuscript by the author to whom correspondence is to be addressed, delineating the scope of the submitted article declaring the potential competing interests, acknowledging contributions from authors and funding agencies, and certifying that the paper is prepared according to the 'Instructions for Authors'. All inconsistencies in the text and in the reference section and any typographical errors must be carefully checked and corrected before the submission of the manuscript. The article should not contains any such material or information that may be unlawful, defamatory, fabricated, plagiarized, or which would, if published, in any way whatsoever, violate the terms and conditions as laid down in the copyright agreement. The authors acknowledge that the publishers have the legal right to take appropriate action against the authors for any such violation of the terms and conditions as laid down in the copyright agreement. Download the Copyright letter
Bentham Science has collaborated with the Copyright Clearance Center to meet our customer’s licensing, besides rights & permission needs.
The Copyright Clearance Center’s RightsLink® service makes it faster and easier to secure permission from Bentham Science’s journal titles. Simply visit Journals by Title and locate the desired content. Then go to the article’s abstract and click on “Rights and Permissions” to open the RightsLink’s page. If you are unable to locate the content you wish to use or you are unable to secure the rights you are seeking, please e-mail us at firstname.lastname@example.org
Published/reproduced material should not be included unless written permission has been obtained from the copyright holder, which should be forwarded to the Editorial Office in case of acceptance of the article for publication.
By signing the Copyright Letter, the authors retain the rights of self-archiving (subject to certain restrictions).
Following are the important features of the self-archiving policy of Bentham Science journals:
To ensure permanent access to our publications, Bentham Science has an agreement with Portico to have a long-term preservation of the content published in its journals.
The Journal publishes peer-reviewed full-length / mini-review articles, research papers, and drug clinical trial studies written in English. Single topic/thematic issues may also be considered for publication.
These special issues are peer-reviewed and may contain invited or uninvited review/mini-review articles. A Single Topic Issue Editor will offer a short perspective and co-ordinate the solicitation of manuscripts between 3-5 (for a mini-thematic issue) to 6-10 (for full-length thematic issue) from leading scientists. Authors interested in editing a single topic issue in an emerging topic of drug targets involved in cardiovascular and hematological disorders may submit their proposal to the Editor-in-Chief at email@example.com for consideration.
For proposals to publish conference proceedings in this journal, please contact us at email: firstname.lastname@example.org
The length of a published comprehensive review article is from 35000 to 40000 words with 100 or more references excluding figures, structures, photographs, schemes, tables, etc.
Mini-reviews should be 6000-10000 words with 75 or more references excluding figures, structures, photographs, schemes, tables etc.
Systematic Reviews include systematic updates on review protocols, methods, research and results from all relevant fields for any studies and updates on already published issues. The total number of words for a published systematic review is from 35000 to 40000 words with 100 or more references excluding figures, structures, photographs, schemes, tables etc. Systematic reviews and meta-analyses must be reported according to PRISMA guidelines; (www.prisma-statement.org).
Bentham Science Publishers supports retrospective registration of systematic reviews, in a suitable registry (such as PROSPERO). The registered systematic review must include the registration number as the last line of the manuscript abstract.
Research articles should be of 4000-6000 words with 75 or more references excluding figures, structures, photographs, schemes, tables, etc.
Case reports should describe new observations of findings or novel/unique outcomes relevant to the field. The total number of words for a published case report is 1500 to 2000 words with 40 or more references excluding figures, structures, photographs, schemes, tables etc.
Drug clinical trial studies are biomedical or health-related interventional and/or observational research studies conducted in phases in human beings that follow a pre-defined protocol.The study is intended to find out whether promising approaches to the disease prevention, diagnosis, and treatment are safe and effective. The maximum total page length for a drug clinical trial study published in the journal is four journal pages. Each journal page is on average 900 words.
Editorials are short papers on important topics related to the journal. The total number of words in an editorial should not exceed 1000, and it should contain only 10-15 references. An abstract is not required.
Commentaries present an analysis by scientists on different important issues related to the publications in the journal. Commentaries should contain less than 3000 words, including the abstract, main text, references, and figure legends. However, an abstract is not necessary.
A perspective provides a short overview of a research topic relevant to the field. The length of a published perspective ranges from 1500 to 1800 words, with 20 or more references, excluding figures, structures, photographs, schemes, tables, etc.
There is no restriction on the number of figures, tables or additional files e.g. video clips, animation and datasets, that can be included with each article online. Authors should include all relevant supporting data with each article (Refer to Supplementary Material section).
The manuscript should be written in English in a clear, direct and active style. All pages must be numbered sequentially, facilitating in the reviewing and editing of the manuscript.
It is advisable that authors prepare their manuscript using the template available on the Web, which will assist in preparation of the manuscript according to Journal’s Format. Download the Template.
Manuscripts submitted for research and review articles in the journal should be divided into the following sections:
The title of the article should be precise and brief and must not be more than 120 characters. Authors should avoid the use of non-standard abbreviations and question marks in titles. The first letter of each word should be in capital letters except for articles, conjunctions and prepositions.
As recommended by the Reporting guidelines information about the study should be a part of the title (particularly for randomized or clinical trials, systematic reviews and meta analyses).
Authors should also provide a short ‘running title’. Title, running title, byline, correspondent footnote and keywords should be written as presented in original manuscripts.
Title page should include paper title, author(s) full name and affiliation, corresponding author(s) names complete affiliation/address, along with phone, fax and email.
The abstract of an article should be its clear, concise and accurate summary, having no more than 250 words, and including the explicit sub-headings (as in-line or run-in headings in bold). Use of abbreviations should be avoided and the references should not be cited in the abstract.
All the original research articles, systematic reviews and meta analyses must be accompanied with a structured abstract. Ideally, each abstract should include the following sub-headings, but these may vary according to requirements of the article.
The headings can vary, but must state the purpose of the study, details of the participants, measurements, methods, main findings and conclusion.
The clinical trial studies should have the registration number at the end of the study.
A graphic must be included with each manuscript for use in the Table of Contents (TOC). This must be submitted separately as an electronic file (preferred file types are EPS, PDF, TIFF, Microsoft Word, PowerPoint and CDX etc.). A graphical abstract, not exceeding 30 words along with the illustration, helps to summarize the contents of the manuscript in a concise pictorial form. It is meant as an aid for the rapid viewing of the journals' contents and to help capture the readers’ attention. The graphical abstract may feature a key structure, reaction, equation, etc. that the manuscript elucidates upon. It will be listed along with the manuscript title, authors’ names and affiliations in the contents page, typeset within an area of 5 cm by 17 cm, but it will not appear in the article PDF file or in print.
Graphical Abstracts should be submitted as a separate file (must clearly mention graphical abstract within the file) online via Bentham's Manuscript Processing System (MPS).
6 to 8 keywords must be provided. Choose important and relevant keywords that researchers in your field will be searching for so that your paper will appear in a database search. The keywords should be contained in the title and they should appear several times in the article. In biomedical fields, MeSH terms are a good ‘common vocabulary’ source to draw keywords from https://www.nlm.nih.gov/mesh/meshhome.html.
The main text should begin on a separate page and should be divided into title page, abstract and the main text. The text may be subdivided further according to the areas to be discussed, which should be followed by the Acknowledgements, List of Abbreviations, Conflict of Interest an and Reference sections. The Review Article should mention any previous important recent and old reviews in the field and contain a comprehensive discussion starting with the general background of the field. It should then go on to discuss the salient features of recent developments. The authors should avoid presenting material which has already been published in a previous review. The authors are advised to present and discuss their observations in brief.
For Research Articles the manuscript should begin with the title page and abstract followed by the main text, which must be structured into separate sections as Introduction, Materials and Methods, Results, Discussion, Conclusion, Ethics Approval and Consent to Participate, Human and Animal Rights, Conflict of Interest, Acknowledgements and References. If your research article reports the results of a controlled health care intervention such as a Drug Clinical Trial Studies/Case Report, list your trial registry, along with the unique identifying number.
All randomized clinical trials must include a flow diagram and authors should provide a completed randomized trial checklist (see CONSORT Flow Diagram and Checklist; www.consort-statement.org) and a trial protocol.
The manuscript style must be uniform throughout the text and 10 pt Times New Roman font should be used. The full term for an abbreviation should precede its first appearance in the text unless it is a standard unit of measurement. The reference numbers should be given in square brackets in the text. Italics should be used for Binomial names of organisms (Genus and Species), for emphasis and for unfamiliar words or phrases. Non-assimilated words from Latin or other languages should also be italicized e.g. in vivo, in vitro, per se, et al. etc.
Section headings should be numbered sequentially, left aligned and have the first letter capitalized, starting with the introduction. Sub-section headings however, should be in lower-case and italicized with their initials capitalized. They should be numbered as 1.1, 1.2, etc.
The Introduction section should include the background and aims of the research in a comprehensive manner.
This section provides details of the methodology used along with information on any previous efforts with corresponding references. Any details for further modifications and research should be included. Sufficient details should be provided to the reader about the original data source in order to enable the analysis, appropriateness and verification of the results reported in the study.
It is important for the Methods Section should be sufficiently detailed in respect of the data presented, and the results produced from it. This section should include all the information and protocol gathered for the study at the time when it was being written. If the study is funded or financially supported by an organization to conduct the research, then it should be mentioned in the Methods Section. Methods must be result-oriented. The statement regarding the approval by an independent local, regional or national review committee (e.g. name of ethic committee and institutional review board) should be part of the Methods Section.
Repeated information should not be reported in the text of an article. A calculation section must include experimental data, facts and practical development from a theoretical perspective.
The important and main findings of the study should come first in the Results Section. The tables, figures and references should be given in sequence to emphasize the important information or observations related to the research. The repetition of data in tables and figures should be avoided. Results should be precise.
This should explore the significance of the results of the work, present a reproducible procedure and emphasis the importance of the article in the light of recent developments in the field. Extensive citations and discussion of published literature should be avoided.
The Results and Discussion may be presented together under one heading of “Results and Discussion”. Alternatively, they may be presented under two separate sections (“Results” Section and “Discussion” Sections). Short sub- headings may be added in each section if required.
A small paragraph summarizing the contents of the article, presenting the final outcome of the research or proposing further study on the subject, may be given at the end of the article under the Conclusion section.
The authors need to declare the funding sources of their manuscripts clearly by providing the name of the funding agency or financial support along with allotted grant/award number in round brackets (if applied), for instance, “This work was financially supported by [Name of the funding agency] (Grant number XXX).
Similarly, if a paper does not have any specific funding source, and is part of the employment of the authors, then the name of the employer will be required. Authors will have to clearly state that the funder was involved in writing, editing, approval, or decision to publish the article.
Greek symbols and special characters often undergo formatting changes and get corrupted or lost during preparation of manuscript for publication. To ensure that all special characters used are embedded in the text, these special characters should be inserted as a symbol but should not be a result of any format styling (Symbol font face) otherwise they will be lost during conversion to PDF/XML.
Authors are encouraged to consult reporting guidelines. These guidelines provide a set of recommendations comprising a list of items relevant to their specific research design. Chemical equations, chemical names, mathematical usage, unit of measurements, chemical and physical quantity & units must conform to SI and Chemical Abstracts or IUPAC.
All kinds of measurements should be reported only in International System of Units (SI).
In case there is a need to present lengthy, but essential methodological details, use appendices, which can be a part of the article. An appendix must not exceed three pages (Times New Roman, 10 point fonts, 900 max. words per page).The information should be provided in a condensed form, ruling out the need of full sentences. A single appendix should be titled APPENDIX, while more than one can be titled APPENDIX A, APPENDIX B, and so on.
We do encourage to append supportive material, for example a PowerPoint file containing a talk about the study, a PowerPoint file containing additional screenshots, a Word, RTF, or PDF document showing the original instrument(s) used, a video, or the original data (SAS/SPSS files, Excel files, Access Db files etc.) provided it is inevitable or endorsed by the journal's Editor.
Supportive/Supplementary material intended for publication must be numbered and referred to in the manuscript but should not be a part of the submitted paper. In-text citations as well as a section with the heading "Supportive/Supplementary Material" before the "References" section should be provided. Here, list all Supportive/Supplementary Material and include a brief caption line for each file describing its contents.
Any additional files will be linked into the final published article in the form supplied by the author, but will not be displayed within the paper. They will be made available in exactly the same form as originally provided only on our Web site. Please also make sure that each additional file is a single table, figure or movie (please do not upload linked worksheets or PDF files larger than one sheet). Supportive/ Supplementary material must be provided in a single zipped file not larger than 4 MB.
Authors must clearly indicate if these files are not for publication but meant for the reviewers'/editors' perusal only.
If abbreviations are used in the text either they should be defined in the text where first used, or a list of abbreviations can be provided.
All potential conflicts of interest that could have a direct or indirect influence on the work must be disclosed by the authors. Even if an author does not have a conflict, disclosing affiliations and interests allows for a more comprehensive and open approach, which leads to a more accurate and objective evaluation of the work. Conflicts of interest, whether genuine or imagined, are a perspective to which the readers are entitled.
The publication of a conflict statement in the article itself, as well as the submission of the conflict disclosure form, is required for all types of papers. It is not necessarily the case that a monetary relationship with examination support or funding for counseling work is inappropriate.
The following are some examples of potential conflicts of interest that are directly or indirectly related to the research:
Financial competing interests include (but are not limited to):
In addition, interests other than monetary and any funding (non-financial interests) should be declared if they are relevant to readers. Personal relationships or conflicting interests directly or indirectly related to research, as well as professional interests or personal opinions that may impact your research, are examples of these.
Intellectual property, in basic terms, refers to any intangible property that is the result of creativity, such as patents, copyrights, etc. Similarly, this section seeks to know about copyright and patent (licensed patent, pending or issued) and any payment received for intellectual property such as,
All conflict of interest disclosure forms are collected by the corresponding author. It is sufficient for the corresponding author to sign the disclosure form on behalf of all authors in author collaborations when legal agreements for representation allow it. The templates of the form can be found here.
Before the reference list, the corresponding author will include a summary statement in the text of the article that reflects what is reported in the potential conflict of interest disclosure form (s).
Please acknowledge anyone (individual/company/institution) who has contributed to the study by making substantial contributions to conception, design, acquisition of data, or analysis and interpretation of data, or who was involved in drafting the manuscript or revising it critically for important intellectual content. Please list the source(s) of funding for the study, for each author, and for the manuscript preparation in the acknowledgements section.
This journal complies with the International Committee of Medical Journal Editors' Uniform Requirements for Manuscripts Submitted to Biomedical Journals www.icmje.org and the FDA's Good Reprint Practices for the Distribution of Medical Journal Articles and Medical or Scientific Reference Publications on Unapproved New Uses of Approved Drugs and Approved or Cleared Medical Devices www.fda.gov/oc/op/goodreprint.html
All clinical investigations should be conducted according to the Declaration of Helsinki principles. For all manuscripts reporting data from studies involving human participants, formal review and approval by an appropriate institutional review board or ethics committee are required.
Compliance with the guidelines of the International Committee of Medical Journal Editors www.icmje.org) is recommended, in accordance with the patient’s consent for research or participation in a study as per the applicable laws and regulations regarding the privacy and/or security of personal information, including, but not limited to, the Health Insurance Portability and Accountability Act of 1996 ("HIPAA") and other U.S. federal and state laws relating to confidentiality and security of personally distinguishable evidence, the General Data Protection Regulation (GDPR) (EU) 2016/679 and member state implementing legislation, Canada's Personal Information Protection and Electronic Documents Act, India's Information Technology Act and related Privacy Rules, (together "Data Protection and Privacy Laws").
It is the responsibility of the author to ensure that:
Editors may request that authors provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study. The editors reserve the right to reject manuscripts that do not comply with the above-mentioned requirements. The author will be held responsible for false statements or failure to fulfill the above-mentioned requirements.
Anonymous images, that do not identify the individual directly or indirectly, such as through any identifying marks or text, do not require formal consent, for example, X-rays, ultrasound images, pathology slides or laparoscopic images.
In case consent is not obtained, concealing the identity through eye bars or blurring the face would not be acceptable.
For research involving animals, the authors should indicate whether the procedures followed were in accordance with the standards set forth in the eighth edition of “Guide for the Care and Use of Laboratory Animals” (grants.nih.gov/grants/olaw/guide-for-the-care-and-use-of-laboratory-animals_prepub.pdf published by the National Academy of Sciences, The National Academies Press, Washington, D.C.).
Research work on animals should be carried out in accordance with the NC3Rs ARRIVE Guidelines. For In Vivo Experiments, please visit https://www.nc3rs.org.uk/arrive-guidelines
Authors should clearly state the name of the approval committee, highlighting that legal and ethical approvals were obtained prior to initiation of the research work carried out on animals, and that the experiments were performed in accordance with the relevant guidelines and regulations stated below.
All experimental research on plants (either cultivated or wild), should comply with international guidelines. The manuscript should include a declaration of compliance of field studies with relevant guidelines and/or relevant permissions or licenses obtained by the IUCN Policy Statement on Research Involving Species at Risk of Extinction and the Convention on the Trade in Endangered Species of Wild Fauna and Flora.
Bentham Science expects all contributors to respect values of justice, benevolence, and autonomy when conducting research. We understand that certain situations such as medical emergencies or humanitarian crises may differ from non-emergency scenarios. Bentham Science recommends that research efforts should not hurt human subjects/respondents or the researchers, and should be conducted with sufficient scientific rigor as permissible in these situations, respectively. Care should be taken to address potential problems faced by persons who may be victims of disasters or involved in a medical emergency. These are vulnerable individuals and their privacy and dignity should be respected. Researchers should make note of this in their research and identify potential issues in their work that may arise because of such situations. Research directed in emergency circumstances should be to the greatest advantage of survivors involved in the research and with the goal of minimizing any future casualties. For guidance, the essential requirements of research in emergency situation are the preservation of human life, wellbeing and security, along with the rights to protection, privacy and confidentiality of subjects.
Unethical behavior and misconduct may be pointed out by anyone to the Editor and Publisher with sufficient evidences. The Editor, in consultation with the Publisher, will initiate investigation against this Unethical misconduct, complete the procedure till an unbiased decision is reached, and maintain confidentiality throughout the process of the investigation. The Author should be given the opportunity to reply to all minor or major accusations.
In case of serious breaches, the employer may be informed where appropriate, by the Editor/Publisher, after reviewing all available information and evidences or after seeking help from experts in that field.
If the manuscript has an individuals’ data, such as personal detail, audio-video material etc., consent should be obtained from that individual. In case of children, consent should be obtained from the parent or the legal guardian.
A specific declaration of such approval must be made in the copyright letter and in a stand-alone paragraph at the end of the Methods section especially in the case of human studies where inclusion of a statement regarding obtaining the written informed consent from each subject or subject's guardian is a must. The original should be retained by the guarantor or corresponding author. Editors may request to provide the original forms by fax or email.
All such case reports should be followed by a proper consent prior to publishing.
Randomized drug clinical trial studies are biomedical or health-related interventional and/or observational research studies conducted in phases in human beings who are randomly allocated to receive or not receive a preventive, therapeutic, or diagnostic intervention that follows a pre-defined protocol. The study is intended to determine the safety and efficacy of approaches to disease prevention, diagnosis and treatment.
Authors of randomized controlled trials are encouraged to submit trial protocols along with their manuscripts. All clinical trials must be registered (before recruitment of the first participant) at an appropriate online public trial registry that must be independent of for-profit interest (e.g.,www.clinicaltrials.gov). If you wish the editor(s) to consider an unregistered trial, please explain briefly why the trial has not been registered.
Important points to remember while submitting clinical trials:
The editors reserve the right to reject manuscripts that do not comply with the above-mentioned requirements. The author will be held responsible for false statements or failure to fulfill the above-mentioned requirements.
References should be submitted preferably in the ACS or Vancouver style. All references must be complete and accurate. The reference numbers must be finalized and the bibliography must be fully formatted before submission.
The references should be relevant to the study and should refer to the original research sources. Self-citation and self-interest should be avoided by the authors, editors and peer-reviewers.
See below few examples of references listed in the ACS and Vancouver Style:
In ACS style, all references should be numbered sequentially [in square brackets] in the text and listed in the same numerical order in the reference section. Superscript in the in-text citations and reference section should be avoided.
Different reference formats have different rules for citation. See below for some common format examples.
The minimum required information for a journal article reference is author, abbreviated journal title, year, publication, volume number, and initial page of cited article, though complete pagination is possible. Journal abbreviation and volume are italicized. Year of publication is bold. All authors must be cited and there should be no use of the phrase et al. Journal abbreviations should follow the Index Medicus/MEDLINE.
Some important points to remember
In Vancouver style, all references should be numbered sequentially [in square brackets] in the text and listed in the same numerical order in the reference section. Punctuation should be properly applied as mentioned in the examples given above.
Different reference formats have different rules for citation. See below for some common format examples.
The required information for a journal article is author, abbreviated journal title, year, publication, volume number, and initial page of cited article, though complete pagination is possible. It is necessary to list all authors if the total number of author is six or less and for more than six authors use three authors and then et al (the term "et al." should be in italics). Journal abbreviations should follow the Index Medicus/MEDLINE. Capitalize the first letter of the first word in the title. The rest of the title is in lower-case, with the exception of proper names.
Some important points to remember
The source of data and materials should be mentioned in the manuscript, in support of the findings. Sharing research data is integral to its transparency and reproducibility. Data sharing involves the citation and availability of data that support the findings of the research.
Bentham Science encourages authors to share the source of data and materials in the manuscript, in support of the findings.
The four types of research data policies are mentioned below.
Wherever appropriate and possible, the journal encourages authors to publish data to support their research findings in a public repository. Any datasets mentioned in the article that are available in external repositories should be cited.
How to Cite the Data?
Whether the data was developed by the author(s) or researcher(s), all publicly available data referenced in the preparation of an article should be cited in the text and reference list. The references relating to the data availability should be presented in the following format:
Example: Name of author(s), the title of data set, data repository, document version (e.g., most recent updated version), Digital Object Identifier (DOI), and Bentham Science reference style should be included in data citations.
When authors submit a paper to a journal, the authors agree that the data provided in the publication, including the relevant raw data, will be freely available to any researcher who wants to use these for non-commercial reasons without jeopardising participant anonymity.
Data availability declarations are required under Bentham Science research data policy types.
The statement relating to the data availability should be presented in the following format under a separate section for ‘Availability of Data and Materials’ in the manuscript:
Additional Data Availability Statements
Authors can add or change the statement(s) above, to fit their work the best. Depending on the nature of the research, several assertions may need to be merged.
All datasets on which the paper's conclusions are based must be made accessible to reviewers and readers, according to the journal's rules. Prior to peer review, authors must either deposit their datasets in publicly accessible repositories or provide them as supplementary materials with their submission.
The Authors are encouraged to use industry-recognized reporting guidelines for biomedical and biological research, if applicable, to explain that all requirements for reporting have been adopted.
All authors must strictly follow the reporting guidelines below for preparing the study for publication.
All authors must strictly follow the guidelines below for preparing illustrations for publication in Cardiovascular & Hematological Disorders - Drug Targets. If the figures are found to be sub-standard, then the manuscripts will be rejected.
The authors are expected to submit good quality figure(s) in PDF, PPT, MS Word, TIFF or JPEG versions, which, if required, should be improved yourself or by professional graphic designers of your organization/ country. You may even consider approaching our contracted service providers Eureka Science for Graphics Enhancement Services.
The Graphics Designing team at Eureka Science can assist in improving the quality of your images at affordable rates. Eureka Science has contracted special rates with us of US $130 for the improvement of up to five figures, with any additional figures being charged at US $20 each.
The quality of Graphic Enhancement Services offered by Eureka Science can be viewed at http://www.eureka-science.com/images/Binder1.pdf, along with valuable feedback on their services at http://www.eureka-science.com/testimonials.php. You may contact Eureka Science at email@example.com
Note: Availing Graphics Enhancement Services does not guarantee acceptance of the manuscript for publication. The final acceptance/decision on the manuscript is taken by the EiC.
Illustrations must be provided according to the following guideline:
Line Art image type is normally an image based on lines and text. It does not contain tonal or shaded areas. The preferred file format should be TIFF or EPS, with the color mode being Monochrome 1-bit or RGB, in a resolution of 900-1200 dpi.
Halftone image type is a continuous tone photograph containing no text. It should have the preferred file format TIFF, with color mode being RGB or Grayscale, in a resolution of 300 dpi.
Combination image type is an image containing halftone , text or line art elements. It should have the preferred file format TIFF, with color mode being RGB or Grayscale, in a resolution of 500-900 dpi.
Illustrations may be submitted in the following file formats
Bentham Science does not process figures submitted in GIF format.
For TIFF or EPS figures with considerably large file size restricting the file size in online submissions is advisable. Authors may therefore convert to JPEG format before submission as this results in significantly reduced file size and upload time, while retaining acceptable quality. JPEG is a ‘lossy’ format. However, in order to maintain acceptable image quality, it is recommended that JPEG files are saved at High or Maximum quality.
Zipit or Stuffit tools should not be used to compress files prior to submission as the resulting compression through these tools is always negligible.
Please refrain from supplying:
Technical requirements for graphic/ figure submissions.
|Width = 8.5 inches (In-between the required size)|
|Height = 11 inches (In-between the required size)|
|Pixels/Inches = 300 (minimum dpi)|
|All figures should be in vector scale (except half tone, photograph.)|
There are many software packages, many of them freeware or shareware, capable of converting to and from different graphics formats, including PNG.
General tools for image conversion include Graphic Converter on the Macintosh, Paint Shop Pro, for Windows, and ImageMagick, available on Macintosh, Windows and UNIX platforms.
Bitmap images (e.g. screenshots) should not be converted to EPS as they result in a much larger file size than the equivalent JPEG, TIFF, PNG or BMP, and poor quality. EPS should olity. EPS should only be used for images produced by vector-drawing applications such as Adobe Illustrator or CorelDraw. Most vector-drawing applications can be saved in, or exported as, EPS format. In case the images have been originally prepared in an Office application, such as Word or PowerPoint, then the original Office files should be directly uploaded to the site, instead of being converted to JPEG or another format that may be of low quality.
Note for authors To maintain publication quality, figures submitted in colour will be published in colour only.
Chemical structures MUST be prepared in ChemDraw/CDX and provided as separate file.
[As according to the ACS style sheet]
|Bond spacing||18% of width|
|Fixed length||14.4 pt (0.500cm, 0.2in)|
|Bold width||2.0 pt (0.071cm, 0.0278in)|
|Line width||0.6 pt (0.021cm, 0.0084in)|
|Margin width||1.6 pt (0.096cm)|
|Hash spacing||2.5 pt (0.088cm, 0.0347in)|
|Font||Times New Roman|
|Under the Preference Choose|
|Under Page Setup Use|
Bentham Science Publishers requires that all individuals listed as authors must have made a substantial contribution to the design, performance, analysis, or reporting of the work. The role of authors is judged on the basis of ICMJE guidelines that are available here.
All contributing authors are required to sign a copyright letter, mentioning complete details, including full name, affiliation, email address, ORCID ID and their role in the article. After successful electronic submission of a manuscript, a system-generated acknowledgement will be sent to all authors on their provided email addresses.
The authors’ names and their affiliations should be provided as per the standards of the journal. The email address of the principal author should be provided with an asterisk. However, the complete address, business telephone numbers, fax numbers and e-mail address of the corresponding author must be stated to receive correspondence and galley proofs. Bentham Science Publishers recommends that all contributors regularly update their profiles on SCOPUS/ORCID and other databases.
Authors are strongly recommended to use their ORCID ID when submitting an article for consideration. Alternatively, they can acquire an ORCID ID via the submission process. For more information about ORCID IDs, visit here.
At the time of initial submission, the finalized list of authors in correct sequence should be provided, which will not be changed once the publication process has started.
If any change is essential, then it can only be done after the approval of the Editor-in-Chief upon receiving the following details from the corresponding author:
Any amendment to the authors’ list will only be considered and approved by the Editor-in-Chief after complete verification. Publication of the manuscript will be withheld during consideration of the request. However, if the manuscript has already been published online, requests approved thereafter by the Editor-in-Chief will result in an erratum or corrigendum.
The corresponding author is responsible for obtaining permission from all co-authors for any changes in the authorship.
Activities such as the acquisition of funding, general supervision of a research group or general administrative support, writing assistance, technical editing, language editing, and proofreading alone do not qualify any contributor for authorship. Such contributors may be acknowledged individually or together as a group in the acknowledgement section. Further details for writing acknowledgements are available here. Persons not meeting authorship criteria can be acknowledged in the acknowledgement section of the article rather than being enlisted as authors.
All contributing authors should contribute substantially to the article and sign the copyright letter. Bentham Science Publishers discourages authorship based solely on position (e.g., a research supervisor or a departmental head). We use COPE guidelines for identifying any suspected ghost, guest or gift authorship.
Manuscripts containing language inconsistencies will not be published. Authors should seek professional assistance for correction of grammatical, scientific and typographical errors before submission of the revised version of the article for publication. Professional editing services may also be sought by the team available at Bentham Science.
Authors will receive page proofs of their accepted paper before publications. To avoid delays in publication, proofs should be checked immediately for typographical errors and returned within 48 hours. Major changes are not acceptable at the proof stage. If unable to send corrections within 48 hours due to some reason, the author(s) must at least send an acknowledgement on receiving the galley proofs or the article will be published exactly as received and the publishers will not be responsible for any error occurring in the published manuscript in this regard.
The corresponding author will be solely responsible for ensuring that the revised version of the manuscript incorporating all the submitted corrections receives the approval of all the co-authors of the manuscript.
No page charges will be levied to authors for the publication of their article. However, the authors may decide for some paid-for editorial services such as open access publication and/or a faster overall publication for their article(s).
For this journal an optional fast publication fee-based service called QUICK TRACK is available to authors for their submitted manuscripts.
QUICK TRACK allows online publication within 2 weeks of receipt of the final approved galley proofs from the authors. Similarly the manuscript can be published in the next forthcoming PRINT issue of the journal. The total publication time, from date of first receipt of manuscript to its online publication is 12 weeks, subject to its acceptance by the referees and modification (if any) by the authors within one week.
The author will be initially charged a small fee on receipt of the agreement form for Quick Track publication to cover the initial costs incurred for expedited peer- review of the submitted manuscript. Later, the Quick Track publication fee (US$ 52 per composed page charges) will be payable in advance, after acceptance of the manuscript, before online publication of the article. However, if the article is rejected at the peer-review stage, then the US$ 52 per composed page charges will not be charged.
Please note that whether the author opts for the QUICK TRACK facility or not, standard reviewing practices will be followed, which will not in any way affect the acceptance or rejection of the manuscript by the reviewers.
Authors who have availed QUICK TRACK services in a BSP journal will be entitled for an exclusive 30% discount if they again wish to avail the same services in any Bentham journal.
For more information please contact the Editorial Office by e-mail at firstname.lastname@example.org.
Bentham Science offers a 50% discount off the Quick Track Publication Fee for manuscripts of all corresponding authors who reside in countries which are categorized as low-income economies by the World Bank. To see if you qualify to the discount, please refer to the complete list of these countries click here.
Bentham Science also offers authors the choice of “Open Access Plus (Gold Open Access)” publication of articles at a fee of US$ 400 per article. This paid service allows for articles to be disseminated to a much wider audience, on the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0) (https://creativecommons.org/licenses/by/4.0/legalcode). Authors are asked to indicate whether or not they wish to pay to have their article made more widely available on this “Open Access Plus (Gold Open Access)” basis. Where an author does not opt-in to this paid service, then the author’s article will be published only on Bentham Science’s standard subscription-based access, at no additional cost to the author.
Authors who select the “Quick Track” publication option and also wish to have their article made available on an “Open Access Plus (Gold Open Access)” basis will be entitled to a 50% discount on the “Open Access Plus (Gold Open Access)” publication fee.
For more information please contact us at e-mail: email@example.com
Bentham Science offers a 50% discount off the Open Access Plus (Gold Open Access) Fee for manuscripts of all corresponding authors who reside in countries which are categorized as low-income economies by the World Bank. To see if you qualify to the discount, please refer to the complete list of these countries click here.
Printed reprints and e-prints may be ordered from the Publisher prior to publication of the article. First named authors may also order a personal online subscription of the journal at 50% off the normal subscription rate by contacting the subscription department at e-mail: firstname.lastname@example.org.
Extend the scope and visibility of your research by creating an animated abstract. Bentham Science has collaborated with Focus Medica, one of the world’s largest publishers of expert animated atlases and videos in medicine and science.
An animated abstract will help summarise the essential discoveries/ key findings of your published research or review article. Each professionally produced full-coloured animated abstract in video format (length 3 – 5 minutes) is accompanied by an English spoken or foreign language commentary. The animated abstract will be published online along with the published article.
The payment for an animated abstract will be US$ 1190 for English language, and US$ 1690 for Foreign language articles. Initially, an advance amount of US$ 700 will be payable to the Publisher to start work on the Animated Abstract, while the balance of US$ 490 (English language) or US$ 990 (Foreign language) will be payable on completion of the Animated Abstract.
Authors who opt for the “ Animated Abstract” option and also wish to have their article made available on an “Open Access Plus (Gold Open Access)” basis will be entitled to a 50% discount only on the Animated Abstract fee and, in addition, pay the normal Open Access Plus (Gold Open Access) fee.
Authors will be asked whether they wish to opt-in for this paid animated abstract service, and if not, the article will be published as normal. Animated abstracts are available as open access (free viewing) for maximum visibility and awareness to readers at anytime, anywhere. The animated abstracts are licensed under the terms of the Creative Commons Attribution – NonCommercial-NoDerivatives 4.0 International Public License (CC BY-NC-ND 4.0) https://creativecommons.org/licenses/by-nc-nd/4.0/
For a sample of an animated abstract please access here http://www.eurekaselect.com/video.html
Bentham Science offers discounts to those corresponding authors who are based in low-income countries*.
The authors who wish to avail this offer should request for a discount at the time of submission of their manuscripts to Bentham Science.
Bentham Science offers 50% discount on the Open Access Plus (Gold Open Access) Fee, Quick Track Fee and Article Processing Charges (APC) for manuscripts of the corresponding authors based in countries categorized as low-income economies by World Bank (list given below).
For any query or suggestion, please contact us on email@example.com.
All papers submitted for publication are immediately subjected to preliminary editorial scrutiny by the Editor-in-Chief regarding their suitability. The Editor-in-Chief determines if the manuscript
(a) falls within the scope of the journal and
(b) meets the editorial criteria of Bentham Science Publishers in terms of originality and quality.
Manuscripts that appear to be suitable are then subjected to single-blind peer-review by, usually three, neutral eminent experts. The services of eminent international experts are sought through invitations to conduct the peer-review of a submitted manuscript, keeping in view the scope of the manuscript and the expertise of the reviewers. The identity of the reviewers is not disclosed to the authors. The anonymity of reviewers ensures objective and unbiased assessment of the manuscript by the reviewers.
Before sending the manuscripts to reviewers, Bentham Science seeks consent from potential reviewers about their availability and willingness to review. Correspondence between the editorial office of the journal and the reviewers is kept confidential. The reviewers are expected to provide their reports in a timely fashion since a prompt review leads to timely publication of a manuscript which is beneficial not only to the authors but to the scientific community as well.
The editorial process and peer-review workflow for each journal are taken care of by a team of Senior Editors, Editorial Board Members (EBMs) and dedicated Journal managers who have the required expertise in their specific fields.
Bentham Science Publishers carries out independent review of all articles. The reviewers are selected according to their expertise, from our, regularly updated, referee database.
On the basis of reviewer comments, the Editors may recommend acceptance, revision or rejection of a manuscript.
After review of the manuscript by at least three independent experts, in addition to the views of the Editor, the decision is relayed to the authors, which may be categorized as:
Bentham Science requests not to have the manuscripts peer-reviewed by those experts who may have competing interest with the author(s) of a submitted manuscript. It is not possible for Editors to be aware of all competing interests; it is therefore expected that the reviewers would inform the Editor-in-Chief/Handling Editor if they notice any potential competing interest during the course of review of a manuscript. Moreover, the reviewers are expected to inform the Editors or editorial office of the journal if they have a conflict of interest in carrying out the review of a manuscript submitted by any author/contributor of the manuscript.
The authors are usually requested to resubmit the revised paper within 15 days and it will then be returned to the reviewers for further evaluation. The publishers normally allow one round of revision and, in exceptional cases, a second round of revision may be allowed. If further revision is needed, then the manuscript is rejected and the author is requested to resubmit the manuscript for fresh processing.
The final decision regarding acceptance or rejection is that of the Editor-in-Chief, depending on the quality of the revision and his assessment of the quality of the manuscript. In rare cases, manuscripts recommended for publication by the referees may be rejected in the final assessment by the Editor-in-Chief.
The time frame for revision of any article may vary from one to four weeks, depending on the nature of the revision required (minor or major). However, authors who need extra time for revision should consult the Editor-in-Chief/Handling Editor with valid reasons and the submission date of the revised manuscript may be extended if the request is genuine.
After the successful completion of the review and acceptance of the article, the articles are typeset and proofs are dispatched to authors for any corrections prior to final publication.
All peer-reviewing will be conducted via the Internet to facilitate rapid reviewing of the submitted manuscripts. Every possible effort will be made to assess the manuscripts quickly with the decision being conveyed to the authors in due course.
Bentham Science Publishers uses the iThenticate software which detects instances of overlapping and similar text in submitted manuscripts. This software checks content against a database of periodicals, the Internet, and a comprehensive article database. It generates a similarity report, highlighting the percentage overlap between the uploaded article and the published material. Any instance of content overlap is further scrutinized for suspected plagiarism according to the publisher’s Editorial Policies. If the similarity seems legitimate, the article will be proceeded for further review process; however, in cases of superfluous plagiarism, the authors have to revise the text as per editorial instructions.
Bentham Science Publishers strictly follows the COPE guidelines to detect plagiarism; for more clear insight, authors may refer to flowcharts provided by COPE by clicking here or by visiting COPE website.
The text of every submitted manuscript is checked by using the Content Tracking mode in iThenticate. The Content Tracking mode ensures that manuscripts with an overall low percentage similarity (but which may have a higher similarity from a single source) are not overlooked. If the similarity level is significantly high, then the manuscript is returned to the author for paraphrasing the text and citing the original source of the copied material.
It is important to mention that the text taken from different sources with an overall low similarity percentage will be considered as a plagiarized content if the majority of the article is a combination of copied material.
There may be some manuscripts with an overall low similarity percentage, but a higher percentage from a single source. For instance, a manuscript may have less than 20% overall similarity but there may be 15 % similar text taken from a single article; the similarity index in such cases is higher than the approved limit for a single source. Authors are advised to thoroughly rephrase the similar text and properly cite the original source to avoid plagiarism and copyright violation.
We all know that scholarly manuscripts are written after a thorough review of previously published articles. It is therefore, not easy to draw a clear boundary between legitimate representation and plagiarism. However, the following important features can assist in identifying different kinds of plagiarized content. These are:
Published manuscripts which are found to contain plagiarized text are retracted from the journal website after careful investigation and approval by the Editor-in-Chief of the journal. A ‘Retraction Note’ as well as a link to the original article is published on the electronic version of the plagiarized manuscript and an addendum with retraction notification in the journal concerned.
To ensure the scholarly integrity of every article, Bentham Science will publish post-publication notices. The authors of the published articles, or those who have submitted the manuscripts with false information, or fabricated the supporting data or images, will be liable for sanctions, and their papers will be retracted. For further details, please visit complete guidelines at: https://benthamscience.com/Fabricating-and-stating-falsein-formation.php
Bentham Science is a publishing partner of Kudos. All authors who publish in this journal will receive an invitation to join the Kudos platform, an entirely free service for authors. Kudos enables authors to help broaden their audience and readers, increase their professional profile and reputation, and establish an impact for their publications. The website link is www.growkudos.com.
Kudos provides a free platform to researchers to have their publications accessible, read and cited across multiple networks and channels available to researchers for the dissemination of their work. It takes on average 15 minutes and leads to 23% higher growth in full-text downloads.
Authors are encouraged to explain their work in clear English and to attract researchers of the relevant communities, share a trackable link that you can email to your existing network of contacts, or share on social media and academic websites, and track how well the articles are performing through the summary of views, downloads, citations, and altmetrics on the Kudos dashboard.
Authors may also use the new shareable PDF (S-PDF) service. The S-PDF provides researchers with the means to write and share a high-level overview for each of their publications. Kudos thereby provides researchers, and their publishers and institutions, with a rich understanding of which channels and activities are most effective for broadening the reach and impact of published science.
Committee on Publication Ethics (COPE) is an advisory body that ensures the highest standards of editorial practice in scholarly publishing, by providing guidance to editors and publishers in all aspects of publication ethics.
Cardiovascular & Hematological Disorders-Drug Targets is committed to upholding ethical standards in scholarly publishing. This journal is affiliated with COPE and adheres to its guidelines. To learn more about COPE guidelines, visit COPE website.
Bentham Science Publishers is pleased to offer electronic publication of accepted papers prior to scheduled publication. These peer-reviewed papers can be cited using the date of access and the unique DOI number. Any final changes in manuscripts will be made at the time of print publication and will be reflected in the final electronic version of the issue. Articles ahead of schedule may be ordered by pay-per-view at the relevant links by each article stated via the E-Pub Ahead of Schedule
Articles appearing in E-Pub Ahead-of-Schedule sections have been peer-reviewed and accepted for publication in this journal and posted online before scheduled publication. Articles appearing here may contain statements, opinions, and information that have errors in facts, figures, or interpretation. Accordingly, Bentham Science Publishers, the editors and authors and their respective employees are not responsible or liable for the use of any such inaccurate or misleading data, opinion or information contained in articles in the E-Pub Ahead-of-Schedule.
Generally, the editorial decisions are not reverted. However, authors who think that their manuscript was rejected due to a misunderstanding or mistake may seek an explanation for the decision. Appeals must give sound reasoning and compelling evidence against the criticism raised in the rejection letter. A difference of opinion as to the interest, novelty, or suitability of the manuscript for the journal will not be considered as an appeal. The EIC and other relevant editors will consider the appeal and the decision thereafter taken by the journal will be deemed final. Acceptance of the manuscript is not guaranteed even if the journal agrees to reconsider the manuscript, and the reconsideration process may involve previous or new reviewers or editors and substantive revision.
Authors who wish to make a complaint should refer them to the Editor-in-Chief of the journal concerned. Complaints to the Publisher may be emailed to firstname.lastname@example.org